Tip #1408 – The Sales IQ Top Row Button Operation has Changed in Version 2013

We have redesigned and rearranged the buttons on the dynaMACS Sales IQ screen to make navigation easier and more intuitive.  There are two new buttons on the Sales IQ Home screen, the Back button and the Home button.  You will also notice that some of the buttons have a different cosmetic look.

Old Screen . . .

Old Screen Buttons

New Screen . . .

New Screen Buttons

New Back Button

The new Back button is active on any “Drill-Down” screen.  Drill-Down screens are accessed by right clicking on a record and selecting Show Manufacturers, Show Customers, Show Sales Reps or Show Details from the Manufacturers, Customers or Sales Reps tabs in Sales IQ (Sales IQ Drill-Down).  The Back button will take you back to the previous Sales IQ screen.

  1. Notice that the Back button is disabled in the Sales IQ Home screen in the example below.  We selected the manufacturer Lee Jacob Mfg, right clicked and selected Show Customers.
  2. In the Sales IQ Drill Down screen you will see that the Back button is now activated.  By selecting this button you will be returned to the previous screen (Sales IQ Home).SIQ Screen 1

New Home Button

The new Home button will close all of the Drill-Down screens and bring you back to the Sales IQ Home screen Overview tab.

  1. In the following example we have selected the Home button from the 3rd Sales IQ Drill Down screen.SIQ Screen 2
  2. After selecting the Home button you will be returned to the Sales IQ Home screen.SIQ Screen 3

Saving Sales IQ Filters

The Sales IQ Filters are now saved after exiting Sales IQ.  You can access the saved filters by toggling between Filtered data and Normal data.

SIQ Screen 4

Case Study: Conveying & Power Transmission Solutions (CPTS)

 “Having real-time data available wherever and whenever we need it has greatly improved the way we operate.”

Vicki Cockerham, General Manager
Conveying & Power Transmission Solutions

Client Challenge

Conveying & Power Transmission Solutions (CPTS) had some major issues with their prior sales and commission software. It was difficult to use, manual data entry took over a week and reports couldn’t be exported. “We needed software that helped us operate more efficiently, while also providing sales reps a way to access data while on the road,” says General Manager Vicki Cockerham. “It was time to find a solution that better fit our needs.”

CPTS_StatisticsdynaMACS Solution

When CPTS was introduced to dynaMACS, they saw that the software had extensive reporting capabilities, yet was surprisingly easy to use. As an added bonus, dynaMACS saved the agency days of manual data entry time and ensured everyone could access information from anywhere, anytime.

Three powerful features work together to deliver the complete solution that CPTS was looking for:

dynaMACS Mobile: Sales reps have mobile access to data anywhere they go: On the road, at a client office or home – anytime they need it. Information is always there.

Cloud: Not only can reps access the information, but because CPTS processes on the cloud, reps can see real-time information data from most smart devices. As the agency enters data, the data is uploaded to the cloud and reps can see the very latest sales information.

Reporting: The reporting process has done a complete 180°. From reports that couldn’t be exported and were difficult to generate, to present day, in which reports are generated in seconds. dynaMACS converts raw data into useful information.  The agency can choose from pre-defined reports or custom reporting options. Saving even more time, the reps can run reports themselves, rather than having to call the office.

Access to real-time data, anytime and anywhere has forever changed the way the agency runs its business.

Tip #1407 – Evaluating True Agency Performance

Often times an agency picks up new lines and also loses lines.  When looking at sales numbers in Sales IQ, these numbers can often be distorted when you display both new manufacturers and lost manufacturers along with your active manufacturers.  The following examples will help you to identify your true sales numbers by excluding these manufacturers.  Also, modifying the manufacturers name with a symbol provides a quick visual when displaying all manufacturers in a list.

Classifying a Manufacturer Status

When adding a manufacturer the status is set to “New” by default.  Once a “New” manufacturer has met the agency’s requirements for categorizing the manufacturer as “Active”, the status should be updated.   Many agencies make this change after 1 year.  The following example shows how to change a manufacturer’s status.

  1. From the Manufacturer Maintenance screen, select Active from the drop down list in the Status field.
  2. Select the Save button and then the Exit button.Manufacturer Maint Screen

Adding a Symbol to the Manufacturer Name for an Easy Visual of New or Lost Lines

For a quick visual of “New” or “Lost” lines in your Sales IQ display list, you can modify the manufacturer name with a symbol that is easily identifiable such as “<-“ for a lost manufacturer or “<+” for a new manufacturer.   Once you change the status from “New” to “Active”, then you can remove the symbol from the manufacturer.


In the following example you can see the new manufacturer Simplex Manufacturing which has the “<+” in front of the name and you’ll see that there are sales in the column Jan-Oct14 but no sales in previous years.  You will also see the inactive manufacturer S P & P Inc. which has the “<-“ in front of the name and no sales in Oct 14 or this YTD Jan-Oct 14  but sales in previous years indicating a lost manufacturer.

Sales IQ Screen 1

Excluding New and Inactive (lost) Manufacturers from the Sales IQ Display

You can remove “New” and “Inactive” manufacturers from the Sales IQ display by using the Filters button in Sales IQ.  This method will remove these sales numbers from the display showing you only the agency sales for “Active” manufacturers eliminating the new and lost lines.

  1. Select the Filter button from the Sales IQ screen.Filters Screen 1
  2. From the Filters screen select Active from the Status drop down list under Manufacturer.
  3. Select the Apply button.Filters Screen 2
  4. After filtering you can see that only ”Active” manufacturers are displayed in the Sales IQ screen.Sales IQ Screen 2

Case Study: Sullivan & Associates

“dynaMACS has made my job so much more efficient. ”

Reyna Vargas, Office Manager
Sullivan & Associates, Inc.

Sullivan_Associates_LogoClient Challenge

Cumbersome and time consuming. That was the problem with Sullivan & Associates Sales, Inc.’s former sales and commission software.

The team knew time was being wasted on outdated software that was difficult to use and required the agency to enter non-essential information. But they didn’t realize the extent of the lost time until they used dynaMACS.

Sullivan_Associates_StatisticsdynaMACS Solution

A referral led Sullivan & Associates to dynaMACS, and they liked what they saw from the start. The first time-saver was the ease of use and intuitive screens that made the implementation simple. “We really didn’t need any assistance. We were up and running in no time,” says office manager Reyna Vargas.

Shortly after the agency began using dynaMACS it became even more apparent how much more efficient dynaMACS is than their prior software. “The amount of time it takes to enter commission statements has dropped from two weeks to four days,” Vargas says. That’s 112 hours of data entry time reduced to 32 – one third of the time it previously took!

One reason for the time savings: the old software required the agency to enter extraneous data. “We had to enter a lot of data that we didn’t need, but it was mandatory.”

Not so with dynaMACS. Agencies can customize data entry fields to collect only relevant information. For example, Vargas can set up her system to enter customer name, date, part number, quantity, sales rep split, PO number and more. Or if she doesn’t need some of that information, the fields are not required. They will be automatically skipped as she enters data.

Vargas’ overall impression of dynaMACS? “It’s made my job so much more efficient.”

Tip #1406 – dynaMACS Software Start Options

You can set your preferences in dynaMACS so that either the Sales IQ, Process, eSi or cRm screens open first upon launching dynaMACS.  You can also set preferences so that when your Sales IQ screen opens, the Source field defaults to Sales or Commission Received.  The following explains how to set these preferences.

Setting the dynaMACS Main Screen Focus

You can select what screen you would like to appear when first launching dynaMACS by selecting it in the Preferences screen.  In the following example we will change the start screen from the dynaMACS Home screen to the Sales IQ screen.

  1. From the main dynaMACS screen select File>Preferences.Main Screen
  2. From the User Preferences screen go to field 29 – Start screen.  Select the down arrow to the right under the Preference column.  This will display all of the start options available.  Select SalesIQ from the drop down list and select the Save button and then the Exit button.  The next time you log into dynaMACS you will be in the Sales IQ screen.User Pref Screen 1

Setting the Sales IQ Screen Source Default

You can choose to have the Sales IQ screen start with the Source field defaulted to Sales OR Commission Received by setting it in the Preferences screen.  In the following example we will change the preference to start Sales IQ with the source of Commission Recd.

  1. From the main dynaMACS screen select File>Preferences.Main Screen
  2. From the User Preferences screen go to field 28 – Start Sales IQ As:.  Select the down arrow to the right under the Preference column.  This will display all of the start options available.  Select Commission Recd from the drop down list and select the Save button and then the Exit button.  The next time you log into Sales IQ the source will be defaulted to Commission Recd.User Pref Screen 2

Tip #1405 – Maximize the dynaMACS State/Region Zip Code Feature

dynaMACS has a powerful feature that automatically populates the State/Region field based on the Zip Code entered when adding or updating customer records (provided a valid 5 digit zip code is used).  The use of the State/Region code is beneficial when generating reports in either Sales IQ or a Sales Analysis report.  The following instructions show you how to activate this feature.

***IMPORTANT!  PLEASE create a restore point before activating this feature and running the utilities!***

Example of a State/Region Report printed from Sales Analysis Rpt Generator:

Report Sample

Step 1:  Turn on the Auto Build State/Region Feature in System Information Setup

  1. From the dynaMACS main screen select Other Functions>Administration>System Information Setup.dynaMACS Main Screen 1
  2. Select the System Options tab.
  3. Check the box Automatically build State/Region upon Zip Code Change?
  4. Select the Save button.Sys Info Setup Screen

Step 2:  Run System Utility 1007 (Creates Customer State/Region codes table)

  1. From the dynaMACS main screen select Other Functions>Utilities>System UtilitiesdynaMACS Main Screen 3
  2. Select Utility #1007
  3. Select the Run buttonSys Utilities Screen 1
  4. Select the Yes button on the Confirmation dialog box.Confirmation Dialog Box  Delete Confirmation Box

Step 3:  Run System Utility 1008 (Replaces Customer State/Region codes in customer records)

  1. From the dynaMACS main screen select Other Functions>Utilities>System UtilitiesdynaMACS Main Screen 2
  2. Select Utility #1008
  3. Select the Run button to complete the update.Sys Utilities Screen 2